#Super slicer 3d series#
This is the first of a series of simple, and I hope useful, projects for the Ender 3 (and any other 3D printer for that matter). Printing a Lithophane as a Block Engraving on an Ender 3 Printing a “Merry Christmas” banner on an Ender 3 a silhouette) then I can produce a printing block for printing that silhouette image onto card/plastic/wood or whatever. I reckon that if I can make a lithograph out of a two layer images (i.e. One of my experiments with the Ender 3 is to use it to produce a printing block from a an image. Just to make it a little more interesting, instead of a flat slab this used a wedge so the text is at an angle.Īnother Simple Freecad Text Example: Raised text at an angle Using a Lithograph as a printing block This one below does the opposite and extrudes out from a block. While the above post cuts text into a slab.
#Super slicer 3d how to#
How to add raised text on a 3D design in FreeCad Simple FreeCAD Text Example: How to cut 3D Text in a design. This is my post aide-memoire that describes how to add text as a cut through to a 3D design. I promptly forgot everything I’d learned. After getting my knees metaphorically skinned going up the learning curve I then put the project down for a couple of weeks. I wanted to embed text into a 3-D design. Here’s how I fixed it.įreeCAD Snap Package Font Problems: Fix How to Add Printable Text to a 3D Design in FreeCAD But there was a problem with accessing the system fonts for the ShapeString tool. (Ubuntu 18.04 & apt-get installed pkg)įreeCAD Font Path Set Up for Text String ShapesĪfter upgrading from Ubuntu 18.04 to Ubuntu 20.04 I moved over to using the FreeCAD snap package rather than the traditionally installed FreeCAD package. Here’s what it is and how to get round it. I encountered a trivially simple but annoying issue when setting up the font path for text strings on FreeCAD for the first time. Printing on Creality Ender 3 with Pronterface USB connection.Ī Gotcha with font setting for ShapeStrings in FreeCAD Also(!) an fix for an extra font problem when using a FreeCAD Snap package.Using Prusa Slicer to produce Gcode for a Creality Ender 3.How to Turn a Simple Freecad Sketch into 3D Object.A Simple worked example with Freecad, Slic3r and Pronterface.So I built a set of posts that followed the development of an ultra simple project from beginning to end. Here’s how I fixed it.Ĭonnecting Pronterface to Ender 3 3D printer with Ubuntu 18.04 LTS Ultra Simple 3D Design from Start to Print There was a simple problem I needed to overcome to use the USB connection. But I wanted to do some 3D printing directly from my laptop running Ubuntu. In fact in many ways that is the best solution. You can just drive the Ender 3 using an SD-Card. But if you find them useful that’s great. They are here mainly as an aid-memoir for me. Here are a set of posts on using Freecad, Prusa Slicer and other tools to produce my own designs.
#Super slicer 3d 32 bit#
I am lucky enough to have one (though mine’s a little old – here’s the 32 bit uprated latest version on Amazon). Saying that I already did comment out everything in Start g-code, but adding homing.The Creality Ender 3 is arguably the best budget printer for 3D printing on the market. That would explain why Kipper is being used by default. But as I use Duet boards, have so far chosen not to. Rat Rig uses Klipper by default on their newer printers.
#Super slicer 3d pro#
I have a Rat Rig vCore Pro 1.3 and used the SS default profile for vCore v3.
0 kommentar(er)
